Filter
Top Products
10
Cable Connections
Do not connect the power until the rst 3 connections have been made.
Connect TV RF sources to the coaxial TV antenna jack. TV RF sources may include: Over-
the-Air receiving antennas or cable lines. You can use a 75 ohm coaxial cable to connect
an outdoor antenna.
Connect Audio sources to the RCA Stereo Input jacks. Audio sources may include: DVD
players, VCRs, or camcorders. Match the red and white ends of the RCA AV cable to the
Red “L” and White “R” jacks on the rear panel of the TV.
Connect video sources to the Video Input jacks. Video sources may include: DVD palyers,
VCRs, or camcorders.
Choose one of 3 connections:
Composite Video (standard quality). Match the yellow end of the RCA AV cable to the
yellow Video jack on the rear panel of the TV .
S-Video (better quality). If the video source has an S-
Video output jack, use an S-Video cable to connect i t
to the S-Video input jack on the rear panel of the TV.
Component Video (best quality). Use the component
video connection for high-denition video. If the video
source has component video output jacks, use compo-
nent video cables to connect them to the component
video input jacks on the rear panel of the TV.
Insert one end of the AC power cord to the Power
input jack on the rear panel of the TV and the
other end to an AC 100-240V wall outlet.
1.
2.
3.
•
•
•
4.
GETTING STARTED
External Video Source
(DVD, VCR, Cable Box)
TV Antenna
(Cable Line, Antenna)