Filter
Top Products
17
AV FUNCTION
Basic Operation
Prepare the AV Input and power connections (see the Getting Started section for details).
Press POWER to turn the TV on.
Press MODE to set the TV to the mode that corresponds with the Video Input jack that is in
use (i.e., Video, S-Video, or Component Video (Y-Cb/Pb-Cr/Pr). You should see the Video
Input signal on-screen.
AV Setup Menu
The AV setup menu contains the following items: Picture, Sound, and Display.
When the Mode is set to VIDEO or S-VIDEO, the AV setup menu will also contain the item
“Parental Controls”.
When the Mode is set to Y-Cb/Pb-Cr/Pr (COMPONENT VIDEO) the AV setup menu will
contain the item “Image Position”.
Press MENU. The Picture Setup menu will appear on-screen.
Use the Navigation keypad (Up or Down) to select another item.
Press OK to enter the selected item.
Please refer to the TV FUNCTION section for more setup option details.
Menu Navigation
To navigate the AV Setup menu:
Use the Navigation keypad (Up or Down) to select (highlight) a desired feature or option in
the menu.
Press OK to conrm a selection to adjust.
For items with a control bar:
Select the item and press OK. An enlarged control bar will be displayed.
Use the Navigation keypad (Left or Right) to adjust.
Press MENU to return when you have completed the adjustment.
1.
2.
3.
•
•
1.
2.
3.
•
•
•
1.
2.
3.
Fine Tune