Filter
Top Products
5–44 Maintenance and Service Guide
Removal and Replacement Procedures
4. Remove the two TM2.5 × 5.0 screws
1
that secure the
display release assembly to the palm rest (Figure 5-35).
5. Remove the assembly
2
from the palm rest.
Figure 5-35. Removing the Display Release Assembly
Reverse the preceding procedures to install the display release
assembly.
5.18 Charger Board
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the palm rest (Section 5.14).
Charger Board
Spare Part Number Information
Charger board
The charger board shield is included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285541-001.
285525-001
272638-001.book Page 44 Thursday, July 25, 2002 4:21 PM