Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–9
6. Remove the hard drive by following these steps:
a. Turn the computer bottom side up with the right side
facing forward.
b. Remove the TM2.5 ×8.0 hard drive retention screw
1
(Figure 5-6).
c. Slide the hard drive forward
2
to unseat the hard drive
connector from the system board.
Figure 5-6. Removing the Hard Drive Screw
Hard Drives
Spare Part Number Information
40 MB
30 MB
20 MB
273491-001
192406-001
288291-001
272638-001.book Page 9 Thursday, July 25, 2002 4:21 PM