Filter
Top Products
Compur Statox 4120
Slide switch S1:
S1 ON OFF
1 Relay active during alarm A2 Relay inactive at alarm A2
2 Relay active during alarm A1 Relay inactive at alarm A1
Toggle switch S3:
S3 ON OFF
1 Detection mode -
2 Rest Alarm by resetbutton R auto - reset
3 Detection mode -
4 Detection mode -
5 Measured value accepted if logic
signal is 0V
-
6 Detection mode -
7 Detection mode Modem - and analog signal
adjustment for service only!
8 Detection mode Delete EPROM for service only!
Ex works settings
3.4 Switch positions of the sensor head pcb
DIP switch S2 (see pic. 9) programs the following parameters:
S2 ON OFF
1 - Detection mode
2 Measured value in ppm Measured value in TLV
3 No self test after “power on“ Self test after “power on“
4 Cal. Factor =1 Factor information from control
module
5 No self test Self test in a 24 h interval
6 - -
7 Detection mode -
8 Detection mode Modem “On” for service
Ex works setting
15