Filter
Top Products
18
c) AUDIO SETUP
The audio setup options are illustrated below:
AUDIO OUT
Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output
mode you prefer. Press Enter button to confirm; There are 3 optional audio output modes:
SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier
with a coaxial cable or an optical cable; When playing a disc recorded with Dolby Digital,
and MPEG audio formats, the corresponding digital signals will be output from the
Coaxial Output jack or Optical Output jack. This player's digital output jacks are designed
for a connection to a Dolby Digital, or MPEG receiver or decoder. For the CD there
is no RAW output only PCMoutput
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital
stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats,
audio signals will be modulated into a 2-channel PCM signal, and it will be output from the
Coaxial Output jack or Optical Output jack.
CONTRAST
Use the Up and Down arrow button to move the scroll and adjust the contrast.
d) VIDEO SETUP
The video setup options are illustrated below:
BRIGHTNESS
Use the Up and Down arrow button to move the scroll and adjust the brightness.
AUDIO SETUP
AUDIO OUT
EXIT SETUP
SPDIF/OFF
SPDIF/PCM
SPDIF/RAW
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
12
10
8
6
4
2
0
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
12
10
8
6
4
2
0