Curtis DVD 1084 DVD Player User Manual


 
Specifications:
Type of video disc:
MPEG 4/DVD/SVCD/VCD/JPEG/CD/CD-R/MP3
Signal output: Video:1.0Vp-p
Mix stereo 1.8 Vp-p.
Video Output : RCA videooutput
S-Video output
Component output (Y,Pb/Cb,Pr/Cr)
Voltage: 100V-240V AC 50/60Hz
Consuming power: 25W
Frequency response: CD *4Hz--20KHz(EIAT) DVD:4Hz--22KHz(48K)(sampling)
4Hz--44KHz(96K)(sampling)
S/N: >90 db
THD: 0 .003%
(No advanced notification shall be advised regarding changes of design, specifications & tech
parameters due to constant product improvement)
1.
2. This Product incorporates copyright protection technology that is protected by method claims
of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Notice:
No paper shall be adhered to surface of disc ;
Disc must be cleaned with soft cotton regularly by directing from disc center outside.
Disc protection:
Take the disc both by the hole in the center and the brim;
Disc must be kept clean;
Disc maintenance
Accessories: RCA cable, infrared ray remote controller, user manual,
1.5V AAA batteries x 2.
Audio Output : Audio RCA 5.1 output (Front R/L-Surr R/L-Center-SW)
Digital Audio Output : Coaxial RCA-Optical(for Dolby Digital decoder)
24