Filter
Top Products
14
Chapter 3:
Operating Your TV
Returning to the factory settings
If you would like to return to the original video settings, as they were calibrated at the
factory, follow these steps :
1
With the TV on, press the MENU button. then “Video” menu will appear.
2
Press the CVOLB buttons to set the “Settings” to ‘Preset’.
The TV will remember the ‘Custom’ settings you had previously chosen. When you
set “Settings” to ‘Custom’ again, your previous custom settings will be restored.
Descriptions of video settings
The contrast setting controls the relation between the light and black areas of the
screen. If the light areas are too bright and are losing details, press the CVOL but-
ton; if the picture is gray and lacks contrast, press the VOLB button.
The brightness settings controls the overall amount of light in the picture. If the pic-
ture is too bright, press the C VOL button; if the picture is too dark, press the VOL
B button.
Sharpness controls how the TV displays edges of objects on-screen. If the TV shows
multiple vertical lines at the edges of an object, press the CVOL button; if the verti-
cal edges of on-screen objects are fuzzy, press the VOL B button.
The color setting controls the intensity of color. If the color is over-saturated, press the
VOLB button; if the color is washed out, press the VOL B button.
The tint setting controls the relationship of red and green in a picture. Tint is espe-
cially noticeable in flesh tones. If flesh tones seem too red or purple, press the VOLB
button; if flesh tones are too green, press the VOLB button.
Select
Video
Settings : Custom
Contrast :
Brightness
Sharpness
Color
Tint
Adjust Next
1
Select
Video
Settings : Preset
Contrast :
Brightness
Sharpness
Color
Tint
Adjust Next
2