Troubleshooting
Your Daewoo television is designed to give you trouble-free performance for many
years. If you have a problem with your TV, try the solutions listed below.
If the suggestions listed below do not solve your problem, contact your Daewoo deal-
er or an authorized Daewoo service center. You can also call Daewoo directly at
1-800-DAEWOO8.
There is no picture or sound, or the TV won't turn on.
¥ Make sure the TV is plugged in.
¥ Make sure the MUTE is not set.
¥ Make sure the power is on.
¥ If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in
and try again.
There is no picture or sound on some UHF channels.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and is adjusted correctly.
¥ See if anything is interfering with the antenna signal.
¥ Make sure the AIR/CABLE setting is correct.
The sound is OK, but the picture is poor.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected and is in good working order, has no broken
wires, and is adjusted correctly.
The picture is OK, but the sound is poor.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and adjusted correctly.
There is poor reception on some channels.
¥ Try another station. If the other stations are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and is adjusted correctly.
You cannot tune to a cable channel.
¥ Make sure the AIR/CABLE setting is correct.
¥ The channel may not be programmed into memory.
The picture rolls, slants, shows lines, is grainy, has poor
color, or has ghosts.
¥ Try another station. If the other station are OK, it may be a station problem.
¥ Check that the antenna is connected, is in good working order, has no broken wires,
and is adjusted correctly.
¥ See of anything is interfering with the antenna signal.
The remote control does not work.
¥ Make sure the TV is plugged in.
¥ Make sure there are fresh batteries in the remote control.
¥ Make sure there is nothing blocking the remote control signal.
21
Chapter 6 :
Troubleshooting
CHAPTER
6