Filter
Top Products
20
Setting TV
4
Setting SYSTEM
Press the [ , ] button in the INSTALL screen to select “SYSTEM” if the
automatic tuning did not already select this correct system.
Select a TV broadcasting type among EURO, E/EURO, FRANCE, and GB with
[ , ] button while the cursor points to SYSTEM.
5
Setting CHANNEL
Press the [
,
] button in the INSTALL screen
to select “CHANNEL”.
Select a channel with the [
,
] button or
[NUMBER] button while the cursor points to
CHANNEL. Press the [OK] button to select
either Cable or Air.
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
Position
0...9
OK
ExitMENU
Adjust
Adjust
Cable/Air
GB
EURO
C 05
175.25
- - - -
03
03
6
Setting FREQUENCY
Press the [
,
] button in the INSTALL screen
to select “FREQUENCY”.
While the cursor points to FREQUENCY, you
can start Manual Tuning by pressing the [
,
]
button over 2 seconds. Also, you can start
Fine Tuning step by step when you press the
button quickly.
To save adjusted values, you should save
PROGRAM with STORE TO after adjusting.
7
Setting NAME
* STATION NAME is mapped as broadcasting
ID. If there is no broadcasting ID, STATION
NAME is displayed as “- - - - ”.
Press the [ , ] button in the INSTALL screen
to select “NAME”.
Enter the Modify mode by pressing the [
,
]
button while the cursor points to NAME.
Press the [ , ] button, characters are
displayed in order.
You can set a NAME consisting of 5
characters.
Press the [OK] button to save the settings.
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
Position
0...9
ExitMENU
Fine Tune
Adjust
GB
EURO
C 05
175.25
- - - -
03
03
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
Adjust
ExitMENU StoreOK
Access