Filter
Top Products
N O T E
Basic Playback
23
1
Press the [ON/OFF] button on the front part of the set to
enter STANDBY mode and press the button on the remote
control, then the TV/DVD turns on.
2
Press the [EJECT] button to open disc tray.
Place a disc on the disc tray with the playback side down.
3
Press the [PLAY ] button.
Disc tray is closed automatically and play begins.
DISC indicator is displayed on the TV screen.
4
In the menu screen displayed on the screen.
Press the [ , , , ] button to select the desired item, then press the
[OK(ENTER)] button or the relevant number directly.
The selected item is played.
5
Press the [STOP ] button to stop play.
Press the [ ] button to pause play.
Press the [EJECT] button to remove the loaded disc.
• Do not move the TV/DVD during play. Doing so may damage the disc and TV/DVD.
• Use the [EJECT] button on the remote control or TV/DVD to open and close the disc tray.
Do not push the disc tray while it is moving. Doing so may cause TV/DVD to
malfunction.
• Do not push up the disc tray or put any objects other than discs on the disc tray. Doing
so may cause the TV/DVD to malfunction.
• Be careful of the disc tray not to bite your finger as it is closing. Especially, be careful as
it will seriously hurt children.
• When appears on the TV screen while a button is pressed, it means that this function
is not available on the disc you are playing.
• Depending on the DVD disc, some operations may be different or restricted. Refer to the
instructions of the disc you are playing.
Playing the DVD Video Disc
When you want to enjoy the sound of DVD video discs or audio CDs from the audio
system, turn on the audio system and select the input source connected to the
TV/DVD.
If you do not have the necessary equipment to enjoy Dolby Digital sound, set the
Digital Audio Output via the SETUP menu to “PCM (Pulse Code Modulation)”.