Daewoo DLP-2612 Flat Panel Television User Manual


 
23
Menu Operation
Picture Control
1. Press the MENU button to call up the menu.
2. Move the selection bar to the Picture menu
with the PR buttons.
3. Press the VOL button.
4. Select the item to adjust with the PR
buttons.
5. Press the VOL buttons.
The level adjust mode of each function appears :
“Brightness”, “Contrast”, “Colour”, “Sharpness”, “Tint”.
You can adjust the level of each item by using the
VOL buttons.
NOTE:
Tint is displayed only when receiving a NTSC
signal. The adjusted levels are stored
automatically in Favourite mode.
NOTE:
You cannot adjust the colour saturation in PC and
DVI mode.
This is PRE-SET to the correct level by the system.
Smart Picture mode Selection
1. Select Mode from the Picture menu.
2. UsingVOL buttons, Select the desired
mode.
Four pictures settings;
Standard > Dynamic > Cinema > Favourite
Note :
When you press the Picture button on the remote
controller repeatedly, you can call up four
pictures settings.
Standard: For a highly dened image in a
normally bright room
Dynamic: For a clear-cut image emphasizing
high contrast for sports viewing
Cinema: Ideal for movies
Favourite: Allows the user to customize settings
as desired.
CH
Picture
Sound
Screen
Install
Features
Move Select Menu:Save
Mode Standard
Brightness 48
Contrast 63
Colour 50
Sharpness 50
Tint 0