Filter
Top Products
INSTALLATION
20 21
Installing your DVD recorder Installing your DVD recorder
6
Select 'Sort TV channels' using […] or [†] and confirm with [√].
7
Select the TV channel that you want to delete or whose order you want
to change using […] or [†].
8
Confirm with [√].
9
Using […] or [†] , shift the TV channel to the desired position and press
the [œ] button. The DVD recorder will insert the TV channel.
10
Repeat steps 6 to 8 until you have resorted/deleted all desired TV
channels.
11
To save, press [OK].
12
To end, press [SYSTEM MENU].
Deleting TV channels
Unwanted channels or those with poor reception can be deleted using [CLEAR]
button . After that you can continue at step 6 .
Installation
Autom. search
… Manual search
◆√Sort TV channels √
† Time/Date
To exit press
SYSTEM MENU
Installation
Sort TV channels
……...
◆√P01 √
† P02
P03
P04
P05
P06
†...
To sort To exit press
Press > SYSTEM MENU
After you have performed the automatic channel search you may not agree with the sequence in which the
individual TV channels have been allocated to the programme positions (programme numbers). You can use this
function to rearrange the TV channels already stored or to delete TV channels you don't want or those with poor
reception.
Sorting and clearing TV channels manually
1
Switch on the TV set. If required, select the programme number for the
DVD recorder.
2
Switch on the DVD recorder using [STANDBY].
3
Press [SYSTEM MENU] on the remote control. The menu bar appears.
4
Select ' ' using […] or [†].
5
Select 'Installation' using [œ] or [√] and confirm with [†].
If the display shows an incorrect time or '-:--', the time and date must be reset manually.
Setting the time and date
1
Switch on the TV set. If required, select the programme number for the
DVD recorder.
2
Switch on the DVD recorder using [STANDBY].
3
Press [SYSTEM MENU] on the remote control. The menu bar appears.
4
Select ' ' using […] or [†].
5
Select 'Installation' using [œ] or [√] and confirm with [†].
6
Select 'Time/Date' using […] or [†] and confirm with [†].
7
Check if the time in 'Time' is correct. If required, change the time with
the number buttons [0..9] on your remote control.
8
Check 'Year', 'Month' and 'Date' in the same way. To move between the
fields, use […] or [†] .
9
Check the displayed settings and confirm with [OK].
10
To end, press [SYSTEM MENU].
Installation
Autom. search
Manual search
… Sort TV channels
◆√Time/Date √
†
To exit press
SYSTEM MENU
Installation
Time/Date
…
◆ Time œ 22:13 √
† Year 2004
Month 01
Date 01
To store
Press OK