Filter
Top Products
INSTALLATION
14 15
Connecting additional devices
Connecting additional devices
Connecting additional devices
Two analogue audio sockets AUDIO L/R (audio signal output left/right) are
located at the back of the DVD recorder.
These can be used to connect the following:
• a receiver with Dolby Surround Pro Logic
• a receiver with two channel analogue stereo
Connecting audio devices to the analogue audio sockets
At the back of the DVD recorder there is a digital audio output socket
DIGITAL AUDIO OUT for a coaxial cable.
This can be used to connect the following:
• an A/V receiver or an A/V amplifier with a digital multi channel sound
decoder
• a receiver with two channel digital stereo (PCM:Pulse Code Modulation)
Connecting audio devices to the digital audio socket
You can connect additional devices such as decoders, satellite receivers,
camcorders, etc. to the EURO AV2 socket. When playback is started on this
additional device the DVD recorder automatically connects the EURO AV2
scart socket with the EURO AV1 scart socket. You will then see the picture
from the additional device on your TV set, even if the DVD recorder is
switched off.
The TV/DVD button on the remote control allows you to switch between
playback through the EURO AV2 scart socket and playback from the DVD
recorder.
Connecting additional devices to the second scart socket
You can connect a video recorder to the EURO AV2 socket.
• If you have an SVHS video recorder, you can additionally use the S-VIDEO OUT
(Y/C) socket and the AUDIO L/R sockets.
Connecting additional video recorders
To copy camcorder recordings, you can use the front sockets. These sockets
are located behind the flap on the left hand side.
Best Picture Quality
If you have a DV or Digital 8 camcorder, connect the DV input of the DVD
recorder to the appropriate DV output on the camcorder.
Very good Picture Quality
If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO input of the
DVD recorder to the appropriate S-VHS output on the camcorder.
You must also connect the audio input AUDIO L/R on the DVD recorder to
the audio output on the camcorder.
Good Picture Quality
If you have a camcorder that only has a single video output (Composite
Video, CVBS), connect the VIDEO input on the DVD recorder to the
appropriate output on the camcorder.
You must also connect the audio input AUDIO L/R on the DVD recorder to
the audio output on the camcorder.
Connect camcorder to the front sockets
DQR-1100D Only