Filter
Top Products
INSTALLATION
12 13
Connecting your DVD recorder to the TV set
Connecting your DVD recorder to the TV set
Connecting your DVD recorder to the TV set
2
1
4
5
3
1
Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD
recorder.
2
Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the
other end into the aerial input socket at the back of the TV set.
3
Insert one end of the supplied video (CVBS) cable into the yellow Phono socket VIDEO (CVBS) at the back of
the DVD recorder and the other end into the video input socket (usually yellow) on the TV set.
4
Insert one end of the supplied audio (Phono) cable into the white/red Phono socket AUDIO L/R at the back of
the DVD recorder and the other end into the audio input socket (usually white/red) on the TV set.
5
Switch on the TV set. Insert one end of the supplied mains cable into the mains socket MAINS at the back
of the DVD recorder and the other end into the wall socket.
Option3: Connecting with video (CVBS) cable
2
1
3, 4
5
The necessary cable connections must be made before you can record or playback TV programmes using your
DVD recorder. Connect the DVD recorder directly to your TV set. If there is a video recorder in between, the
picture quality may be poor because of the copy protection system built into the DVD recorder. We recommend
that you use a scart cable to connect your TV set and DVD recorder.
When you install your DVD recorder for the first time, select one of the following options:
1
Switch off your TV set. Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the
back of the DVD recorder.
2
Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the
other end into the aerial input socket at the back of the TV set.
3
Plug a scart cable into the scart socket EURO AV1 at the back of the DVD recorder and the corresponding
scart socket at the back of the TV set .
4
Switch on the TV set. Insert one end of the supplied mains cable into the mains socket at the back of the
DVD recorder and the other end into the wall socket.
Option1: Connecting with a scart cable
2
1
3
4
1
Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD
recorder.
2
Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the
other end into the aerial input socket at the back of the TV set.
3
Insert one end of a S-Video (SVHS) cable into the S-VIDEO OUT (Y/C) socket at the back of the DVD recorder
and the other end into the S-Video (SVHS) input socket on the TV set.
4
Insert one end of the supplied audio (Phono) cable into the white/red Phono socket AUDIO L/R at the back of
the DVD recorder and the other end into the audio input socket (usually white/red) on the TV set.
5
Switch on the TV set. Insert one end of the supplied mains cable into the mains socket MAINS at the back
of the DVD recorder and the other end into the wall socket.
Option2: Connecting with an S-Video (Y/C) cable