Filter
Top Products
Sound Control
VOLUME CONTROL
Adjust the volume with the LEFT/RIGHT buttons.
MUTE
Pressing the MUTE button ( ) turns the sound off.
The MUTE symbol will be displayed.
The sound returns if the button is pressed once more.
SOUND CONTROL
Call up the Sound menu.
Bass Use this to adjust the low tone.
Treble Use this to adjust the high tone.
Balance Use this to adjust sound balance between
the left and right speakers.
Spatial If you select “Yes”, the Spatial sound effect is available.
SOUND MODE
Stereo/Mono sound selection
When receiving a Stereo programme, Stereo mode is automatically selected.
In Stereo reception if you are unable to get good sound quality due to poor
reception, you can force a change from Stereo to Mono transmission by
pressing the MODE button.
Then the program status display indicates (Mono).
To return back to Stereo, press the MODE button again.
The setting can be individually selected for each PR number.
Language Selection
When receiving a bilingual programme, Sound 1 mode is automatically
selected. The MODE button allows you to toggle between the first and
second language.
The program status display will indicate “Sound 1”, “Sound 2” or (Mono).
NOTE: When receiving a NICAM signal, “NICAM” will be displayed.
ZOOM (ASPECT RATIO) CONTROL
You can select the desired aspect ratio with the ZOOM button on the remote controller
The following picture formats are available:
4:3 16:9 Waterglass Zoom
4:3
for DSL-15D1T
16:9 4:3 Panorama Zoom
16:9
for DSL-17W1T
Normal Wide Normal in PC mode for DSL-17W1T
DSL-15D1T
DSL-17W1T
Daily Use
19
ENGLISH
Daily Use
18
Volume
30
-+
Select Adjust Exit
Picture Bass 50
Sound Treble 50
Features Balance 0
Setup Spatial No
-+
-+
-+
PR 12 - - - - -
Stereo
PR 12 - - - - -
(Mono)
PR 12 - - - - -
Sound 1
PR 12 - - - - -
NICAM Stereo
4:3 16:9 Waterglass Zoom
Normal Wide
16:9 4:3 Panorama Zoom
DSL-15D1T PAL(‡» ˙ )GB 03.11.27 5:24 PM ˘ ` 18 mac001 1200DPI 80LPI