Filter
Top Products
Change language
(Digital mode only)
- You can open the “Language”
sub menu by pressing the MTS
button.
When available this allows
you to change the audio and
subtitle languages
8
PROGRAM SELECTION
SOUND CONTROL
Volume adjustment
Use the remote control VOLUME UP (A13) / DOWN (A13) buttons or
the TV set side panel VOLUME UP / DOWN buttons (B6 or B7).
Mute
Mute the sound by pressing the remote control
SOUND MUTE button (A2).
Then,
logo is displayed on the screen. The previous sound
setting is returned after pressing the same button
a second time.
If a sound related function is used (e.g. VOLUME, 3D)
then the MUTE will also be cancelled.
Mono forcing, dual language
(Analogue mode only)
- If you are unable to get good sound
quality for a program due to poor
reception, you can force a change
from stereo to mono transmission
by pressing the remote control MTS
button (A19). Then the program
status display will indicate „MONO”
with a
icon.
- On the other hand, during a
program with dual language
transmission, the MTS button (A19)
allows you to toggle between the
first and second language. The
program status display will indicate
„DUAL 1” or „DUAL 2” (plus NICAM
according to the received signal).
- To return to the initial state, press
again the MTS button (A19).
Sound effects
A SPATIAL sound effect is available, using the remote
control 3D (A16) button.
The following display appears:
To return to the initial sound effect, press again the 3D (A16) button.
The following display appears:
As an option, the sound effects PANORAMA and Dolby Virtual are
available with the same button. For other adjustments such as
BALANCE, EQUALIZER or AVL(option), use the SOUND menu
(page 10).
Direct selection
Use the remote control NUMBER 0….9 buttons (A6).
For two digits or three digits program numbers, enter the second digit
within 2 seconds.
Up / Down selection
Use the remote control PROGRAM UP (A10) / DOWN (A10) buttons or the
TV set front panel PROGRAM UP / DOWN buttons (B4 or B5).
Spatial sound effect
Sound transmission mode
Clock
No sound effect
Sound transmission mode
Clock
SPATIAL
STEREO
18:30
OFF
STEREO
18:30