Filter
Top Products
ON/OFF
If you press shortly power button of the remote control (A1) on digital mode, your
TV start searching a new software and will go to stand-by mode after finishing.
During this process, the picture is off but power is supplied.
Your TV do this process once a day. To skip this, keep pressing power button (A1)
for 2~3 sec.
See page.13 for detailed information.
5
IMPORTANT SAFEGUARDS
INSTALLATION
Open remote control battery
compartment (at the rear) and insert
two 1.5V type AAA batteries. Warning:
be careful to respect battery polarities.
Insert the main plug into a
220~240V 50Hz AC power socket.
Connect aerial to aerial jack (C3).
SWITCHING ON AND OFF
batteries
WATER AND MOISTURE
The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should be
placed on the apparatus.
HEAT
Never place the set near heat sources.
Never put a naked flame, such as a candle, on the top of TV set.
VENTILATION
Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as in a bookcase
or built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.
OBJECT ENTRY
Do not insert foreign objects, such as needles and coins, in the ventilation openings.
LIGHTNING STRIKE
You should disconnect the set from the mains and the aerial system during thunderstorms.
CLEANING
Unplug the set from the mains while cleaning.
AFTER MOVING THE SET
If the set is moved or turned, the MAIN POWER button must be switched off for at least 15 minutes
in order to take out any colour patches on the screen.
DISCONNECTION
Please place the TV set in such a way that the main plug can be easily disconnected.