Filter
Top Products
9
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A3) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A29), you can enter one of the following settings :
OFF
20 min 40 min 60 min 80 min 100 min 120 min OFF
01 BBC1
STEREO
20
Remaining time (minutes)
before TV set switches off
FORMAT SELECTION
AUTO setting :
If picture format signalling data is received, then
the most appropriate ZOOM format will be au-
tomatically selected. In the absence of this data,
the default ZOOM format will be selected (see
page 12, ZOOM AUTO function under FEATURES
MENU).
Otherwise, the preferred mode of the user can
be forced by repeated pressing of the remote
control ZOOM button (A17):
Television Format 16:9
The following picture formats are
available:
AUTO
4:3 ZOOM 14:9 ZOOM 16:9
FULL SCREEN AUTO
The SLEEP time remaining (before TV turn-off) can be seen again at any time by one
touch on the remote control SLEEP button.
A second touch (while the status display is active) will modify the SLEEP time remaining.
01 BBC1
FAVOURITE
18:30
01 BBC1
NORMAL I
18:30
01 BBC1
NORMAL II
18:30