Filter
Top Products
26
4-3. MECHANICAL MODE (OPERATING THE VCR WITHOUT A CASSETTE TAPE)
a. Remove the FRONT LOADING MECHANISM from the DECK MECHANISM.
b. Pull the F/L RACK.
c. The S/T POLE BASES are loaded and PLAY BACK MODE starts.
d. Turn off the power when the MECHANISM is in the desired position.
a. MAKE MECHANICAL MODE be PLAY MODE. Refer to "4-3 MECHANICAL MODE".
b. Confirm that the datum hole of TENSION LEVER is aligned with the datum hole of the MAIN BASE.
c. If requirement "b" is not satisfied, turn the BAND BRAKE ADJUST CAP clockwise or counter-clockwise
until the two datum hole are aligned with each other.
4-4. TENSION POLE POSITION ADJUSTMENT