Daewoo SH-9810P DVD VCR Combo User Manual


 
59
Trouble Shooting guide (VCR)
Recording a TV program is
impossible.
After pressing “REC”, the videotape
is ejected automatically.
Timer recording of Cable TV does
not work.
In spite of pressing “CHANNEL”, a
channel can not be set.
When duplicating/ copying, picture
is poor anddistorted.
remote control does not work.
Buttons on remote control do not
work.
VISS index search does not work.
Cable broadcasting can not be
selected.
Checks
Symptom
For recording, you should use videotape with a tab. Ensure tab is
NOT
removed
Ensure there is no RF clash if so change RF output.
Please check whether the timer recording info is right.
Are RF cables input/antenna inputs connected correctly?
Please check whether the clock is right.
Does the display on your video show “
(Ready for timer
recording)? Please check!
Please check whether the timer recording info is right.
Please check that the record protect tab on the cassette is intact. (If the
tab is missing, cover the hole with a piece of scotch tape.)
Was a cable data output code connected correctly?
Did you turn off your player? (Please turn it on.)
You may have not memorised channels.
Please check your channel setting or press a number button.
Some tapes or discs distributed in the rental market for hire are
copyright protected to prevent copying. These tapes cannot be
duplicated.
Battery may be weak or exhausted.
The receiver of remote control may be of an incompatible frequency to
sender frequency.
During index search when videotape is positioned towards the
beginning, “VISS REW” and “REW” do not work.
If videotape is at the end, “FF”, “VISS FF”, “PLAY” and “REC” will
not work.
Are you playing a tape that was not recorded on this machine? (Try
to re-record it using this recorder.)
You may start recording it in “REC-PAUSE”. Otherwise start
recording from stop condition.
Please select “CABLE” programme number from the “CHANNEL
SETTING”.
The others