Filter
Top Products
English - 10 -
on the TV and the component video outputs of your device. While connecting, be sure that the
letters on your TV, “
Y”, “Pb”, “Pr” correspond with your device’s connectors.
SCART 2 inputs or outputs for external devices.
Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT
jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your
device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
S/PDIF Out outputs digital audio signals of the currently watched source.
Use an RCA cable to transfer audio signals to a device that has S/PDIF input.
SCART 1 inputs or outputs for external devices.
Connect the
SCART cable between SCART sockets on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode. If both sockets are employed at the same time,
SCART 1 will override
SCART 2 unless manually selected.
PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the
PC INPUT on the TV and the PC output on your PC.
HDMI Input are for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a
High Definition Satellite Receiver or DVD Player. These devices must be connected via the
HDMI socket or Component Socket. These socket can accept either 720p or 1080i signals. No
sound connection is needed for an HDMI to HDMI connection.
Note(optional) : When it is desired to watch HDMI-1 and HDMI-2 source with a DVI to HDMI
cable, in order to enable audio, there are two options that can be used:
- When you want to connect DVI and HDMI 1, the audio signal line must be connected to audio
input in the component terminal (YPbPr).
- When you want to connect DVI and HDMI 2, the audio signal line must be connected to PC
audio input.
-If there is an optional third HDMI(side) socket on your TV, no sound input will be available
through.
01-ENG-32761W-1055 UK-32 INCH-17MB12-(1 HDMI-3D PAN-BASIC PIP-WO SVHS)-50133726.p6504.09.2008, 08:2710