Dantax 32LCD V9 Flat Panel Television User Manual


 
English - 26 -
Note:In AV modes, you can choose NTSC
3.58, NTSC 4.43 or PAL60 as well.
Sound System
Press or button to select Sound System.
Press
/ button to change the sound
system to
BG,DK, L or L’.
Fine Tune
Press or button to select Fine Tune. Press
/ button to adjust the tuning.
Search
Press or button to select Search. Use
/ button to start programme searching. You
can also enter the desired frequency using the
numeric buttons while Search item is
highlighted.
Store
Press or button to select Store. Press
or OK button to store the settings. “Program
Stored
” will be displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install
menu when the TV is in AV modes. Note that
limited options will be available. Switch to TV
mode for viewing complete version of the
Install menu.
INSTALL
Colour System
Store
VCR
Colour System
Press or button to select Colour System.
Use
/ button to change the colour system
to
PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58
or AUTO.
VCR
Press or button to select VCR. Use /
button to set the VCR as On or Off.
Store Program
Press or button to select Store Program.
Press
or OK button to store the settings.
Program Stored” will be displayed on the
screen.
Source Menu
Press or button and select the sixth icon.
Then press
or OK button. Source menu
appears on the screen:
SOURCE
TV
EXT-1
EXT-2
EXT-2 S
BAV
In source menu, highlight a source by
pressing
or button and switch to that
mode by pressing
button. Source options
are;
TV, EXT-1, EXT-2, EXT-2 S, BAV, HDMI,
YPbPr
or PC.
Note: Once you have connected optional
equipment systems to your TV, you
should select the required input to view
pictures from that source.
01-ENG-32761W-1055 UK-32 INCH-17MB12-(1 HDMI-3D PAN-BASIC PIP-WO SVHS)-50133726.p6504.09.2008, 08:2726