Filter
Top Products
6
ENGLISH
v
v CONNECTIONS
NOTES:
• Read the manuals of all the components when making connections.
• Keep the power cord unplugged until all connections have been completed.
• If the power is on when connections are made, noise may be generated and damage the speakers.
• Be sure to connect the left and right channels properly, L (left) to L, R (right) to R.
• Plug the power cord securely into the power outlet. Incomplete connection may result in noise.
• Binding the power cord together with connection cords may result in humming or noise.
(1) Connecting a TV
• Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DN-V210/
DN-V310’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT.
VIDEO IN
S-VIDEO IN
AUDIO IN
LR
DN-V210/DN-V310
S-Video output connector
The video signals are divided
into color (C) and brightness
(Y) signals, achieving a clearer
picture.
If the TV is equipped with an
S-Video input connector, we
recommend connecting it to
the DN-V210/DN-V310’s S-
Video output connector using a
commercially available S-Video
connection cord.
To power outlet
TV
NOTES:
• Connect the DN-V210/DN-V310’s video outputs to the TV either directly or through an AV amplifier. Do not connect it via
a VCR (video cassette recorder). Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL.
(See page 24.)
• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 24.)
• No audio signals are output from the DN-V210/DN-V310’s “AUDIO OUT” connector when discs recorded in DTS are
played.