Filter
Top Products
MARKER
ENGLISH
31
MARKING SCENES YOU WANT TO SEE AGAIN
10
2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want.
Setting Marks
31
SELECT
TITLE
MENU
DISPLAY
RETURN
SUBTITLE
AUDIO ANGLE
MARKER
DISC SKIP 1 2
PROG/DIRECT
2
1
2
1
2
During playback, press the MARKER button.
• The marker screen appears.
•“
*
” is displayed if the mark is not set.
Press the SELECT button at the scene you want to mark.
• A number is displayed.
• Up to five marks can be set.
• If the SELECT button is pressed at a position at which a number is
displayed, the previously marked scene is unmarked and the new scene
is marked.
SELECT
Remote control unit
Remote control unit
NOTES:
• In some cases, subtitles may not be displayed at marked spots.
• The marking function cannot be used for DVDs and video CDs for which the elapsed time is not shown on the display during playback.
• The marks are retained until the power is turned off or the disc is ejected.
• The mark settings will be cleared when changing from the specified disc to a disc of a different disc number, or when the power is set to
the standby mode.
Calling Out Marked Scenes and Clearing Marks
SELECT
DISPLAY
RETURN
SUBTITLE
AUDIO ANGLE
MARKER
45
3
DISC SKIP 1 2
CALL
PROG/DIRECT
1
11
1
Use the 0 and 1 cursor buttons to select the mark number.
• If the marker screen is not displayed during playback, press the
MARKER button to display it.
* To play from the selected mark number:
Press the • cursor button.
The disc returns to the selected mark and playback starts.
* Clearing the selected mark number:
Press the CLEAR button.
The selected mark is cleared.
Remote control unit