Filter
Top Products
62
ENGLISH
MAIN SPECIFICATIONS
19
Signal system: NTSC
Applicable discs: (1) DVD/video discs
1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer
per side)
1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs (1 layer per
side)
(2) Compact discs (CD-DA, Video CD)
12 cm discs, 8 cm discs
S-Video output: Y output level: 1 Vp-p (75 Ω/ohms) C output level: 0.286 Vp-p
Output connectors: S connectors, two sets
Video output: Output level: 1 Vp-p (75 Ω/ohms) Output connector: Pin-plug jacks, two sets
Component output: Y output level: 1 Vp-p (75 Ω/ohms)
Cb output level: 0.648 Vp-p (75 Ω/ohms) Cr output level: 0.648 Vp-p (75 Ω/ohms)
Output connector: Pin jack, 1 set
Audio output: Fixed output level: 2 Vrms, 1 set
Audio output properties: (1) Frequency response
q DVDs (linear PCM) : 2 Hz to 22 kHz (48 kHz sampling)
: 2 Hz to 44 kHz (96 kHz sampling)
w CDs : 2 Hz to 20 kHz
(2) S/N ratio
q DVDs : 115 dB
w CDs : 115 dB
(3) Total harmonic distortion
q DVDs : 0.0025%
w CDs : 0.0030%
(4) Dynamic range
q DVDs : 108 dB
w CDs : 100 dB
Digital audio output: Optical digital output : Optical connector, 1 set
Coaxial digital output : Pin jack, 1 set
Power supply: AC 120V, 60 Hz
Power consumption: 40 W
Maximum external
dimensions: 434 (width) x 131 (height) x 415 (depth) mm (not including protruding parts)
Weight: 9.2 kg
2 Remote control unit: RC-542
Type: Infrared pulse
Power supply: DC 3V, two batteries (“AA” (R6P))
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
* Design and specifications are subject to change without notice in the course of product improvement.