Filter
Top Products
57
ENGLISH
4
5
e When “3 DTS” is selected
1. Off (Factory default)
No digital audio is output during playback of the DVD recorded in DTS.
2. Bitstream(NOTE 1)
DTS bitstream is output during playback of the DVD recorded in DTS.
Select this setting when the player is connected to the DTS decoder.
The settings are completed, and the screen in step 3 reappears.
* To return to the previous menu screen:
Press the RETURN button.
* To exit the default settings:
Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44.
• Recommended “Digital Audio Output” settings
The optimum digital output setting depends on the type of component connected to the digital audio output connector.
When nothing is connected to the digital audio
output connector
When an amplifier equipped with a digital input
connector and with no built-in Dolby Digital (AC-3)
decoder is connected to the digital audio output
connector (see page 11)
When a Dolby Digital (AC-3) decoder is connected
to the digital audio output connector (see page 12)
When a Dolby Digital (AC-3) DTS decoder is
connected to the digital audio output connector
1 No (factory default)
2 Yes (NOTE 1)
2 Yes (NOTE 1)
2 Yes (NOTE 1)
1 Bitstream (factory default)
2 PCM (NOTE 2)
1 Bitstream (factory default)
1 Bitstream (factory default)
1 Off (factory default)
1 Off (factory default)
1 Off (factory default)
2 Bitstream
NOTES:
1. When connecting an amplifier (with an optical/coaxial digital input connector) which does not contain the Dolby Digital (AC-3) or dts decoder,
be sure to select “PCM” at the “2 Dolby Digital” and “Off” at the “3 dts”. If “Bitstream” is selected, any attempt to play DVD may cause
such a high level of noise that it may be harmful to your ears and damage your speakers.
2. Audio output from the player‘s audio output connectors is converted to 48 kHz as well as audio from the digital audio output connector.
To enjoy high quality sound at 96 kHz, connect the amplifier or decoder directly to the audio output connectors, not to the digital audio output
connector. (Select “No” at the “1 LPCM 96k
/
48k”.)
Digital audio output connector
“7 Digital Audio Output” setting
1 LPCM (96k
/
48k)
2 Dolby Digital 3 DTS
Digital Audio Output
1 LPCM 96k 48k No
2 Dolby Digital Bitstream
3 dts Off
0 Exit