Filter
Top Products
21
• MENU
2.3 Motion Detection Setup – Motion Detection Area & Sensitivity
2.4 Alarm Recording Setup – Recording Setup for Alarm Activated
Tip
• Motion Setup Work by Time Schedule and Alarm Schedule Work Independently.
• Camera : Indicate Camera No. to Setup
• Sensitivity : Control Sensitivity (1~100)
Large No. is More Sensitive.
• Region : Setup Motion Detect Range
Entirely – Select Entire Screen
Partially – Select Partial Screen
• When Choose Region as Partially, Move to Partial
Range Setup. Press Enter After Partial Range Setup
to Finish Region Setup.
• Pre-Motion Duration : Setup Pre-Motion Duration Time.
(1~5 sec)
• Post-Motion Duration : Setup Motion Detect Recording
Time after Motion Detected (5sec~3min)
• Camera : Indicate Camera No. to Setup
• Record : Setup Record On/Off when Alarm Activated
• Start : Setup Alarm Recording Start Time (0~24 hr)
• Stop : Setup Alarm Recording Finish Time (0~24 hr)
• Pre-Alarm Duration : When Alarm Recording, Setup
Start Recording Time before Alarm Activate (1~5sec)
• Post-Alarm Duration : Setup Alarm Recording Time
after Alarm Activate (5sec~3min)