Q-See QSDT8PCRC DVR User Manual


 
Error! Use the Home ta
b to apply
1 to the text that you want to
appear here. Error! Use the Home
tab to apply 1 to the text that
you want to appear here.
7
1.2 System Requirements
NOTE: If recorded disk partition’s format is FAT32 and the system has
run for a long time, the system will create a lot of data fragments that
may result in system running slowly. It’s recommended to run a disk
defragmenter every 10 to 30 days. We strongly suggest that you use
NTFS format for recording disk partition.
Card
PC Module
QSDT8PCRC
CPU Intel P4 processor 2.0G minimum
HDD 200GB minimum free space
RAM 512M minimum
VIDEO CARDS
Supports MOST* AGP and PCI-E Video Cards
with 64MB of RAM or more with full Direct Draw support.
*Some newer PCI-E cards are not yet supported
OS (32 bit) Win2000/WinXP/VISTA
DirectX 9.0
CPU Intel P4 processor 2.0G minimum
Table1-1 QSDT8PCRC System Requirements
1.3 Card Specifications
Format: PAL/NTSC.
Resolution: 320x240 (NTSC), 352x288 (PAL).
Maximum Frame rate per channel: 25 fps (PAL), 30 ftp (NTSC). Screen
set: resolution 1024 768, color quality 16 bits or 32 bits.
Compression code rate: 50kbps – 1.2Mbps.
Data format: H.264.
Input Type D type
Video Input 8 Cams
Display Rate 200 fps (PAL) , 240fps (NTSC)
Recording Rate 200 fps (PAL), 240fps (NTSC)
Compression
Format
H.264
Video Resolution 352x288 (PAL) 320x240(NTSC)
Recorder Media HDD, USB Disk, ZIP, CD-R/W via PC
Record Mode Motion/Sensor/Schedule/Manual
Network TCP/IP
I/O Device 8 Ch sensor Input, 1 Ch Relay Output (on board)