Filter
Top Products
14 Using the remote control
Programming the
remote control
You can operate your TV, VCR, DVD, SAT, or AUX devices using your
HRMC-11 or HRMC-12 remote control. Use the Code Entry or Code Scanning
method to program the remote control. Using the Code entry method may be
quicker, but you’ll need to know the correct manufacturer’s control codes for
each component you want to operate. Code scanning may be more
time-consuming, but you don’t need to know manufacturer’s control codes.
1. Keep your remote control aimed at the device you want to control during
this process. The remote control will send out the “power” command for the
device being programmed.
2. Press and hold the device key (for example,
TV)
3. Press press the
MUTE key for two seconds.
4. Release both keys.
The device key should light and remain lit. If it doesn’t remain lit, repeat
steps 1 through 4 above.
5. Choose one of the programming methods described below:
Code Entry
Use the REMOTE pane under the System Setup menu tab to program your
HRMC-11 or HRMC-12 remote control to operate your TV, VCR, DVD and
AUX device. The AUX menu button can be used to control a CATV box or
other type of device. Use the menu buttons to choose the desired type of device
and display a brand name menu list from which you can select the manufacturer
of your device.
Device codes appear in the menu pane for the brand selected. Step-by-step
onscreen help guides you through the procedure. Appendix B – Manufacturers
device control codes, on page 43 also provides a complete list of device codes.
REMOTE
Install
Signal
Wed, Oct 30 11:53AM
Features
Prefs
New Card
Test
Info
Upgrade
Watch TV
VCR
Main Menu
Remote Control Settings
Remote
TV
AUX
VCR
DVD
Factory Defaults
Remote ID Unit 1
Brand
A Mark
Amstrad
Anam
AOC
Audiovox
Akai
Blaupunkt
Highlight the device you want to
select. Press
SELECT
001, 034, 038, 083, 199
1. Aim your remote control at the
TV you want to use.
2. Hold down the TV button.
3. Press the MUTE button for one
second.
4. Release both buttons together.
5. The TV button glows and
remains lit. If the button does not