Filter
Top Products
5. Repeat step 4 four more times for the remaining digits.
Press number 2 for the second digit, 3 for the third digit,
4 for the fourth digit and 5 for the final digit.
CHANGING VOLUME LOCK
Depending on how you set up your remote, the
VOL
and
MUTE
may control the volume only on your TV or other compo-
nents, regardless of which position the switch is under. This
remote can be programmed so that the
VOL
and
MUTE
keys
work ONLY with the component selected above the slide
switch. To select this feature, perform the following steps:
1. Press and hold the
MUTE
and
SELECT
keys until the green
light under the
DIRECTV
icon flashes twice and release
both keys.
2. Using the number keys, enter in
9-9-3
(the green light
will flash twice after the 3).
3. Press and release the
VOL
S key (the green light will
flash 4 times).
Now the
VOL
and
MUTE
keys will work ONLY for the compo-
nent selected by the slide switch position.
To Lock Volume to AV1, AV2 or TV
1. Move the slide switch to the
AV1
,
AV2
or
TV
position to
lock the volume.
2. Press and hold the
MUTE
and
SELECT
keys until the green
light under the selected switch flashes twice and release
both keys.
3. Using the number keys, enter
9-9-3
(the green light will
flash twice).
4. Press and release the
SELECT
key (the green light will
flash twice).
24
DirecTV-M2081A.qxd 12/22/2004 3:45 PM Page 24