Filter
Top Products
First Things First
12
Connection C
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
To receive DSS
®
programming:
• Tune TV to channel 14 if you receive signals off-air.
• Tune TV to channel 65 if you receive signals from cable.
To receive off-air programming (no cable box):
1. Turn off VCR and DSS
®
receiver.
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and DSS
®
receiver.
2. Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3. Tune cable box to desired channel.
To record DSS
®
programming:
1. Tune TV to the channel on which you receive the DSS
®
signal.
2. Tune DSS
®
receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2. Turn DSS
®
receiver off.
VIDEO
DSS
RECEIVER
VCR
IN FROM ANT
OUT TO TV
CABLE
OR
OFF-AIR ANTENNA
LR
SATELLITE IN
AUDIO
L
IN
R
LR
VIDEO
AUDIO
AUDIO INVIDEO IN
SATELLITE
DISH
CH3
CH4
TV
OUT TO TV
IN FROM ANT
AUDIO OUTVIDEO OUT
CAUTION
Do not stack electronic components or
other objects on top of the DSS
®
receiver. See Safety Information, inside
front cover.