Filter
Top Products
10 121150
7. To check the remote control address, press and hold
the SAT mode button for three seconds. Then, let go
of the SAT button, and press the POUND (#)button
twice.TheSAT mode button flashes thesame number
of times as the address you entered in step 3.
8. Pressthe SELECT button to close the
Important System Informationscreen.
SWITCH BETWEEN TV AND DEVICE VOLUME CONTROL
When youset up the remote tocontrol aTV, the MUTE and VOLUME
buttons control the TV volume. However, if you want to use the AUX
mode to control a tuner or amplifier and the device has a volume
setting, you can set up the remote to control the device’s volume
instead of the TV volume.
To set the remote to control the device’svolume:
1. Press and hold the AUX mode button
forthreeseconds,andthen letgo ofit.TheAUX mode
button will blink.
2. Pressthe POUND (#) button.
3. Pressthe plus (+) side of the VOLUME
button.
4. Pressthe 0 number button.
5. Pressthe POUND (#) button.
The AUX mode button flashes three times.
6. Pressthe SAT mode button.
7. Pressthe plus (+) and minus(-) sides of the VOLUME
button.
The device’s volume changes and the AUX mode
button lights instead of the TV mode button.
text_dishpvr.fm Page 10 Tuesday, January 28, 2003 8:04 AM