Filter
Top Products
12 121150
TV/V
IDEO BUTTON
Ifyouconnectthe receiverwithitsback panel TV ANTENNA/CABLE
IN and TV SET OUT ports, use this button to switch the receiver
betweenthe satellite signal(connect it to the SATELLITE IN port) and
another video signal like a cable or broadcast TV antenna input
(connect it to the receiver’s TV ANTENNA/CABLE IN input).
Note: If you connect the receiver to other devices with the phono
(RCA) jacks or the S-VIDEO output, you must use the TV
menus to change the input from local broadcast TV to satellite
TV.
POWER BUTTONS
Press the blank POWER button to turn the receiver on or off. The
POWER light on the receiver’s front panel turns on to show the
receiver is on, and turns off to show it’s off.
MENU BUTTON
Press this button to open the Main Menu.
PAGE UP AND PAGE DOWN BUTTONS
Press the PAGE UP button or the PAGE DOWN button toscan, page
by page, through the Program Guide,aThemes list, a Favorite
List,anEvent Timers list, or a list of channels.
Note: An “event” is any satellite program.
text_dishpvr.fm Page 12 Tuesday, January 28, 2003 8:04 AM