Filter
Top Products
Basic adjustment settings
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
Press a/b to select “EZ Setup”, and then
press ENTER.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press a/b to select “Air”, “Cable(STD)”,
“Cable(HRC)” or “Cable(IRC)”. Press ENTER
to enter the setting.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air”, “Cable(STD)”, “Cable(HRC)” or
“Cable(IRC)”.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again.
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Channel Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
press ENTER.
Press a/b to select“Air”, “Cable(STD)”,
“Cable(HRC)” or “Cable(IRC)”, and then press
ENTER to enter the setting.
Press a/b to select “Air/Cable”, and then
press ENTER.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Repeat steps 1 to step 4 in Antenna setting in
Channel Setup.
Press a/b to select “CH Search”, and then
press ENTER.
• If no channel is found, confi rm the type of connection made
with your TV and try channel search again.
1
2
3
4
5
1
2
3
4
1
2
When “Air/Cable” has been selected in
Antenna setting and then press ENTER
again.
Press a/b to select “Analog & Digital” to
search both analog and digital broadcasts or
“Analog” to search only analog broadcasts or
“Digital” to search only digital broadcasts, and
then press ENTER,and select “Yes”.
• The Channel search will start automatically.
• To exit the Channel search screen, press
RETURN.
When “Air/Cable” is selected in Antenna
setting:
Press a/b to select “Analog & Digital” to
search both analog and digital broadcasts or
“Analog” to search only analog broadcasts or
“Digital” to search only digital broadcasts, and
then press ENTER,and select “Yes”.
• The Channel search will start automatically.
• To exit the Channel search screen, press
RETURN.
3
Press MENU to exit.
6
Press MENU to exit.
4
Press MENU to exit.
5
Language setting
Select from among 3 languages: English, French and
Spanish.
23