Filter
Top Products
Maintenance and Troubleshootin
g
1.Cleanin
g
the pro
j
ector
Clean
the projector cabinet by wiping it gently with a soft cloth.If necessary,
the cabinet can be cleaned usin
g
a neutral deter
g
ent and a soft cloth ensure th
case
WARNING
Always unplu
g
the pro
j
ector before performin
g
any
maintenance.
2.Cleanin
g
the lens
Use a commercially available air blower, or use lens cleaning paper and lens
cleaner approved for use on optical coatings.
Do not clean the lens with harsh materials or subject the lens to shock, as it
ca
n easily become damaged. Close the lens cover when the projector not
in use.
3.
Change Air Filter
When the air filter becomes clogged with dust, etc., the projector may overheat
and turn itself off to prevent internal damage.
Cle
an the air filter every 100-hours.
*If the filter is difficult to clean or if it is deteriorating, it should be replaced
1.Remove the filter cover from the bottom of projector.
2.
Pull out the air filter.
3.Insta
ll the new air filter.
48
AIR FILTER COVER