Filter
Top Products
Maintenance and Troubleshootin
g
Lamp Replacement
La
mp door Lamp Screw
1.
Remove the lamp screw from the lamp door.
2. Remove the Lamp Door.
3. Remove the two Phillips head screws that hold the lamp in place.
4. Grasp the handle on the top of the lamp and pull the lamp straight up
ou
t of the projector.
5.
Slide the replacement lamp into place and press firmly to seat the lamp.
6. Reinstall the screws removed in step 3.
7. R
einstall the lamp door correctly and tighten the screw on the lamp
door.
8. Please see page 60 for resetting the lamp timer.
The lamp and inside of the pro
j
ector become very hot
while the projection lamp is lit. Allow the projector to
co
o
l for at least 15 minutes prior to opening the lamp
door.
CAUTION
Do not touch the bulb.
T
ouchin
g
the bulb will
g
reatly
decrease the life of the lamp and could cause the bulb
to explode.
WARNING
49