Dynex DX-24L150A11 Flat Panel Television User Manual


 
Adjusting the picture
15
DX-24L150A11
3 Press or to highlight an option, then press ENTER to enter
the sub-menu. You can select:
Parental Controls—Control which programs/movies your
children can watch, based on industry ratings.
Time—Set the clock and sleep timer.
Closed Caption—Turn closed captioning on or off. Also
lets you set closed caption options.
Menu Settings—Set menu language and menu
transparency.
VGA Settings—Adjust picture settings to optimize a
computer display. (This menu becomes available only when
a computer display is connected to the television.)
Input Label—Create a unique name for a device
connected to your TV’s input jacks.
Restore Default—Reset most TV settings for the current
source to factory default values.
Audio Only—Turn off the TV picture and listen to audio
only.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the picture
Adjusting the TV picture
To adjust the picture:
1 Press MENU. The Picture menu opens.
2 Press or to highlight an option, then press or to adjust
the option. You can select:
Picture Mode—Selects the picture mode. You can select:
Vivid (a bright and vivid picture)
Standard (a standard picture)
Sports (a dynamic picture)
Theater (a finely detailed picture)
Energy Saving (the backlight brightness is decreased)
Custom (customized picture).
Note: You can also press PICTURE on the remote control to
select the picture mode.
Contrast—Adjusts the contrast.
Brightness—Adjusts the brightness.
Color—Adjusts the color saturation.
Tint—Adjusts the image tint.
Sharpness—Adjusts the sharpness.
Backlight—Adjusts the screen backlight.
3 Press or to highlight Advanced Video, then press ENTER
to enter the sub-menu.
4 Press or to adjust the option. You can select:
Color Temperature—Selects the color temperature. You
can select Warm (to enhance the reds), Cool (to enhance
the blues), or Normal.
Zoom Mode— Selects the aspect ratio of the picture. You
can select:
Auto (selects the correct aspect ratio automatically.
Available only when Auto Zoom is turned ON).
Normal (selects the correct aspect ratio to match the
source image).
Zoom (enlarges the picture but may crop the top and
bottom).
Wide (shows a full-screen picture).
Cinema (stretches the picture at the edges, but
maintains a good aspect ratio at the center of the
screen).
Note: The above aspect ratios are all available only when Overscan is
turned ON when watching a digital program.
Noise Reduction—Selects the noise reduction mode to
reduce picture noise (snow). You can select Weak, Middle,
Strong, or Off.
Overscan—Turn this On to adjust the picture’s
reproduction rate.
Adaptive Contrast—Turn this On to optimize the picture
display for a more vivid image.
DCR—Turn this On to activate the Dynamic Backlight
Control function. Depending on the signal, the TV
automatically adjusts the backlight level, which affects the
overall brilliance of the picture.
Auto Zoom—In TV mode, setting Auto Zoom to On lets you
set the Zoom Mode to Auto.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the computer image
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information,
see “Selecting the video input source” on page 13.
2 Press MENU. The on-screen menu opens.
Picture
Select
Move
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness
50
Backlight
30
Picture
Select
Move
MENU
Exit
Picture Mode
Contrast
Brightness
Color
Tint
Advanced Video
Audio Setup Channel
Custom
70
40
60
0
Sharpness
50
Backlight
30
DX-24L150A11_10-0317.book Page 15 Thursday, March 11, 2010 12:12 PM