Filter
Top Products
22
Using your TV
Memorizing channels
When you first set up your TV or if you move your TV to a different geographical location, you
should scan for (memorize) channels. Your TV searches for all channels in your area that have
a signal, then stores the channel information in memory. When you press CH+ or CH– to
change channels, your TV skips the channel numbers that do not have signals.
To memorize channels:
1 Make sure that you have selected the TV signal source. For more information, see
“Selecting the TV signal source” on page 21.
2 Press MENU. The on-screen display (OSD) opens.
3 Press or to highlight TV, then press to enter the TV menu.
4 Press or to highlight Channel Scan, then press to start the scan.
Deleting channels from memory
After you scan for channels, you can delete a channel from memory if you want to skip the
channel when your press CH+ or CH–. You can still select the skipped channel using the
number buttons.
To delete a channel from memory:
1 Select the channel you want to delete.
2 Press MENU. The OSD opens.
3 Press or to highlight TV, then press to enter the TV menu.
4 Press or to highlight Channel Skip, then press to delete the channel from
memory.
Changing channels
To change channels:
•Press CH+ or CH– to go to the next higher or lower channel.
• Or, press the number buttons to select a channel. For example, to select channel 120,
press 1, then 2, then 0.
•Or, press RECALL to go to the last viewed channel.
Selecting digital sub-channels
A main digital channel may have a sub-channel.
To select a digital sub-channel:
• Press the number buttons for the main channel, press , then press the number
button for the sub-channel. For example, to select channel 3.1, press 3, press , then
press 1.
Adjusting the volume
To adjust the volume:
•Press VOL+ or VOL– to increase or decrease the volume.
•Press Mute to turn off the sound. Press Mute again to turn the sound back on.