Filter
Top Products
How do I program my clock/time?
o Press MENU. The on-screen menu opens.
o Press < or > to select Time, then press v to access the Time menu.
o Press ^ or v to select Time Zone, then press < or > to select a time zone. You can select Pacific, Alaska, Hawaii,
Eastern, Central, or Mountain.
o If your viewing area observes Daylight Savings Time, press ^ or v to select Daylight Saving Time, then press < or > to
select On.
o You are unable to physically change the date or time as this information is automatically be obtained from the digital or
cable signal received by your TV.
I have no sound or my sound has static noise.
o Check volume levels.
o Make sure the TV volume is not muted.
o Make sure your connections are connected correctly to the jacks on the TV.
o Check the signal strength of the channel by pressing the Display button on the remote.
If the signal is Weak:
• Make sure your antenna is connected securely to the TV.
• Move the antenna around the room or close to a window
• Use a basic indoor set-top antenna designed to pick up both VHF and UHF.
OR
Use a set-top antenna that has a built-in signal amplifier.
OR
Use an antenna mounted on your roof or in your attic.
• For more information about antennas and the available channels in you area, visit
www.antennaweb.org
• It is possible you are receiving marginal reception. Both the picture and sound may freeze or
break up due to poor reception.
o The audio cables you are using may be bad, try a new set.
How do I set up my channels or run an autochannel search?
o Are you using a cable/satellite box, cable connected directly to the TV, or an antenna?
If you are using a cable or satellite box you must use the remote that came with that box to change
channels.
• Make sure you have the correct input selected to view channels via the cable or satellite box. For
example, if the cable or satellite box is connected via component cables please press input and
select Component 1 or Component 2 to view your channels.
If you are using cable connected directly to the TV:
• Press MENU. The on-screen menu opens.
• Press < or > to select Channel, then press v to access the Channel menu.
• Press ^ or v to select Air/Cable, then press < or > to select Cable.
• Press ^ or v to select Auto Scan. Press > or ENTER.
• Press ^ or v to select Cable System, then press < or > to select your type of cable or satellite
system. You can select STD, IRC, HRC, or AUTO. If you are not sure what type of system you
have, select AUTO.
• Press ^ or v to select Start to Scan, then press > or ENTER to start scanning. Your TV memorizes
all cable channels you receive.
If you are using an antenna:
• Press MENU. The on-screen menu opens.
• Press < or > to select Channel, then press v to access the Channel menu.
• Press ^ or v to select Air/Cable, then press < or > to select Air.
• Press ^ or v to select Auto Scan. Press > or ENTER.
• Press ^ or v to select Start to Scan, then press > or ENTER to start scanning. Your TV memorizes
all analog and digital channels you receive.
3