Filter
Top Products
12
Using your TV
Opening the on-screen menu
To open the on-screen menu:
1 Press MENU. The on-screen menu opens.
2 Press or to select a menu, then press ENTER. You can select:
• EXIT—Closes the on-screen menu.
• PICTURE—Lets you adjust the picture quality. For more
information, see “Adjusting the picture” on page 14.
• SOUND—Lets you adjust the sound quality. For more
information, see “Adjusting the sound” on page 14.
• CHANNEL—Lets you scan for channels and remove unwanted
channels. For more information, see “Scanning for channels” on
page 12 and “Deleting channels from the channel list” on page
13.
• DETAIL—Lets you change closed captioning styles, set parental
controls, adjust the computer video image, and select the audio
input for connected HDMI devices. For more information, see:
• “Changing digital closed captioning styles” on page 18
• “Setting parental controls” on page 19
• “Adjusting the computer image” on page 21
• “Selecting the HDMI audio mode” on page 22
• LANGUAGE—Lets you change the language for the on-screen
menu. For more information, see “Selecting the on-screen menu
language” on page 13.
Scanning for channels
The first time you turned on your TV, your TV scanned for channels. You
only need to re-scan for channels if:
• You change the TV signal source. For example, you change from
Air to Cable.
• You move your TV to a different viewing area.
• Additional channels have become available since the initial scan.
• You want to restore DTV channels you have deleted.
Your TV stores the scanned channel information in the channel list.
When you press CH or CH , your TV tunes to the next or previous
channel in the channel list, and skips channels that do not have a signal.
To scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press or to select CHANNEL, then press ENTER.
3 Press or to select Autoscan, then press ENTER.
4 Press or to select Air (antenna) or Cable (cable or satellite
TV). Your TV scans for channels. When the scan is complete, the
lowest channel in the channel list is displayed.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
Autoscan
Autoscan
Autoscan will rescan all channels.
This may take a while to complete.
Select the destination of "ANT.IN" jack.
Back
Air
Cable
Cable
Air
Cable
Or
ANT.IN
Now the system is scanning for channels, please wait.
Exit
MENU
72%
Analog channels 10ch
Digital channels 6ch