Filter
Top Products
10
Installation instructionsDX-TVM113
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the
brackets are level.
2 Place spacers (H or N) behind the TV brackets. If you are using M4 washers (F), place them between the
spacers and TV brackets and over the holes in the TV brackets. If you are using M6 washers (G), place them
over the holes in the TV brackets. Insert screws (E, K, or M) through the washers, TV brackets, and spacers.
3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
Yo u ’ l l n e e d
or
or
or
or
E
F (8)
E (4)
Phillips screwdriver
Screws
Washers
Spacers
H (4)
B and C TV brackets
G (4)
K (4)
or
or
or
or
N (4)
M (4)
Level
DX-TVM113_13-0321_MAN_V2_EN.fm Page 10 Friday, April 26, 2013 11:11 AM