Filter
Top Products
18
DX-UPDVD2
To use the Audio Setup Page:
1 Press SETUP. The General Setup Page opens.
2 Press the
(Left), or (Right) buttons to select Audio. The Audio Setup Page opens.
3 Press the (Up), (Down), (Left), or (Right) buttons to move the cursor
and highlight a selection, then press OK to confirm your selection. Options include:
• Digital Audio Output—Sets the audio outputs. This DVD player produces two
kinds of audio output, Bitstream or PCM. This surround sound format is output to a
Dolby Digital/DTS decoder through the coaxial and optical jacks on the back of the
player.
• HDMI Audio —You can set the HDMI audio source. When in PCM mode, all the
audio signals through HDMI are output in PCM format. When in AUTO mode, if the
Digital Audio Output
HDMI Audio
Dynamic Range
Bit
Auto
Audio Setup P age
Go to Audio S etup P age
DX-UPDVD2 09-0463_MAN_ENG_V1.fm Page 18 Tuesday, July 14, 2009 9:20 AM