Filter
Top Products
87
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation Page 58
Example: “Options (2)” screen menu
Description of RS-232C
Note
• Refer to the “SETUP MANUAL” contained on
the supplied CD-ROM for RS-232C Specifica-
tions and Command Settings.
• Refer to the computer owner’s manual for in-
structions for setting the computer’s baud rate.
Direct Power On Function
Menu operation Page 56
Example: “Options (2)” screen menu
Description of Direct Power On
Description
The projector automatically turns on
when the power cord is plugged into
the AC outlet or the breaker switch is
turned on.
The projector is turned on manually
(see page 37), and does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
Selectable items
ON
OFF
Description
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
9600 bps
38400 bps
115200 bps