Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before the product
is operated.
Read all of the instructions given here and retain them for later use.
Unplug this projector from AC power supply before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the manufacturer as they
may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The
projector may fall, causing serious injury to a child or adult, and serious
damage to the projector. Use only with a cart or stand recommended by
the manufacturer, or sold with the projector. Wall or shelf mounting should
follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturer.
Do not expose this unit to rain or use near water... for example, in a wet
basement, near a swimming pool , etc...
Slots and openings in the back and bottom of the cabinet are provided for
ventilation, to insure reliable operation of the equipment and to protect it
from overheating.
The openings should never be covered with cloth or other material, and
the bottom opening should not be blocked by placing the projector on a
bed, sofa, rug, or other similar surface. This projector should never be
placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a
bookcase unless proper ventilation is provided.
This projector should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire
or electric shock. Do not allow anything to rest on the power cord. Do not
locate this projector where the cord may be damaged by persons walking
on it.
Never push objects of any kind into this projector through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the
projector.
Do not attempt to service this projector yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b, If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this
indicates a need for service.
When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer that have the same
characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service
technician to perform routine safety checks to determine that the projector
is in safe operating condition.
This projector is equipped with a
grounding type AC line plug. Should you
be unable to insert the plug into the outlet,
contact your electrician. Do not defeat the
safety purpose of this grounding type
plug.
Follow all warnings and instructions marked on the projectors.
For added protection to the projector during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the
wall outlet. This will prevent damage due to lightning and powerline
surges.
An appliance and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
appliance and cart combination to overturn.
If the projector is to be built into a
compartment or similarly enclosed, the
minimum distances must be maintained.
Do not cover the ventilation slot on the projector.
Heat build-up can reduce the service life of your projector, and can also
be dangerous.