3
3.Operation notice:
Please read and follow the following safety instructions and description carefully.
Inappropriate operation method may result in fire, electrical shock, and personal
injury or shorten the life span of projector.
Warning: Do not cover the lens while the lamp lights up.
Warning: To protect your eyes, do not look directly into the projector’s
light source.
Warning: Make sure that you provide adequate ventilation for the
projector. Do not block the ventilation holes in the case
Warning:
To prevent electrical shock, never open the projector case.
Warning:
Before using, please make sure that the power cord is connected
to an AC receptacle with a protective safety ground terminal. Do
not neglect the receptacle with protective safety ground terminal.
Warning:
To replace the lamp, turn the projector off and unplug the power
cord. To avoid burns, wait 1 hr before opening the lamp door.
For relevant operation procedures, please refer to page 24 the
section of “changing lamp”.
Warning:
Please use the power cord provided. And use the receptacle with
a protective safety ground terminal.
Warning:
Do not block ventilation openings to avoid danger.
Warning:
Do not place any drinks on top of your projector. Spilled liquids
may damage the projector.
Warning:
Do not place the projector on a hot surface, moisture or in direct
sunlight.
Warning:
Handle carefully during transportation. Avoid dropping it.