Filter
Top Products
Features
Thank you for purchasing the DP-640B hybrid pack. This product includes the
following features:
1
Every effort has been made to design dependable and reliable products. New
products are constantly being designed to meet the needs of the entertainment
lighting industry. Your comments regarding our products and services are
welcome. Please send any comment to info@elationlighting.com and let us
kanow how we can improve to better serve you.
It is both a privilege and a pleasure to serve you.
6 channel hybrid pack with dual Edison sockets per channel.
Each channel can be assigned to Dim or Switch modes.
4 function LED's for DMX Address, Patch Address, Local Control
and Dim/Switch modes.
On board Local Control allows for dim intensity adjustment, from
0-100%, for each individual channel.
Dual 20A/AC120V Power line cords.
Digital LED-display.
Two 20 Amp circuit breakers.
Panic function dip switches.
10
Troubleshooting
Troubleshooting
No Power to the pack:
No Channel output:
Undesired 100% channel switch output:
Disconnect the main power line cord. Reconnect the line cord to ensure
proper connection. If the problem still persists, check the building service
panel and make sure the circuit breakers are in the ON position.
Disconnect the main power line cords. Check the circuit breakers to
ensure the are in the ON position. Reconnect line cords. If controlling via
DMX, ensure that you are receiving DMX signal at the pack. Indicator in
the display should be flashing when signal is present. If signal is not
present, check the XLR connections from console or previous fixture in
line. If problem still persists, replace XLR cable between previous device
and pack and try again.
Flip all "PANIC" dip switches to the OFF position. If problem still persists,
check the "LOCAL CONTROL" settings and reset channels by pressing
the corresponding channel button two times so that the channel LED
turns OFF. Then press the "OK" Button store the settings.
If you've tried the above and the unit continues to malfunction, please
contact ELATION customer service at (323) 582-3322, your unit will
require service. Once you describe your problem to the customer service
representative, you will be issued a return authorization number that
must accompany the package when sent in. Please write this RA# on the
outside of the box with a black marker and also write it on any packing
list that may be included with the package.
3 & 5 pin XLR inputs and outputs.