Filter
Top Products
Control and Functions
Data & Power Connections
4
LED-display & Control buttons
1. LED-display: displays the current
value and function mode-including
a DMX signal indicator.
2. DMX Address LED:
3. Patch Address LED:
4. Local Control LED:
5. Dimmer/Switch LED:
this LED
illuminates when in DMX mode.
this LED
illuminates when in Patch mode.
this LED
illuminates when in Manual
Control mode.
this LED
illuminates when assigning dim/
switch modes.
1. DMX IN:
3 & 5 Pin (male) input socket.
2. DMX OUT:
3 & 5 Pin (female) output socket.
3. Power 1:
Power cord 1- powers channels
1~3, 2400 watts.
4. Power 2:
Power cord 2- powers channels
4~6, 2400 watts.
1 2
43
DMX Signal
DMX Address
PatchAddress
Local Control
Dimmer / Switch
MENU
PANIC 1 2 3 4 5 6
OK
1 2 3 4 5 6
MDON
654321
1
4
2
6
3
5
7
8
9
10
1112
6. Menu Button:
7. Channel Buttons 1~6:
8. Down Button:
9. OK Button:
10. UP Button:
11. Channel 1~6 LEDs:
12. Panic dip-switches:
The menu button allows you navigate through function modes.
These buttons are used to select relevant channels.
This button
This button c
Indicate output for relevant channels.
These switches are used to activate selected channels
to full ON when DMX signal is not present.
decreases values and selects desired function
modes.
onfirms and saves relevant settings.
This button increases values and selects desired function modes.
(2) Press the UP/ Down button to adjust the dim
value to your desired setting. The dim range
is from 000 to 100%.
(3) Press the "OK" button to confirm and save
your setting, the display will momentarily flash
confirming that your setting was stored.
Repeat steps 1, 2 and 3 to manually set
additional channel levels and store them.
These settings will be stored to memory until
you dis-engage the set channels.
DMX Signal
DMX Address
Patch Address
Local Control
Dimmer / Switch
MENU
PANIC 1 2 3 4 5 6
OK
1 2 3 4 5 6
MDON
654321
DMX Signal
DMX Address
Patch Address
Local Control
Dimmer / Switch
MENU
PANIC 1 2 3 4 5 6
OK
1 2 3 4 5 6
MDON
654321
Operation Guide
7
The Local Control option allows for manual control of the packs six channels via
the on-board buttons.
Select the channel that you wish to manually
control by selecting from buttons 1-6. Only one
channel can be selected at a time.
(1)
DMX Signal
DMX Address
PatchAddress
Local Control
Dimmer / Switch
MENU
PANIC 1 2 3 4 5 6
OK
1 2 3 4 5 6
MD
ON
654321
Function Mode 3: Local Control (Manual)
DMX Signal
DMX Address
Patch Address
Local Control
Dimmer / Switch
MENU
PANIC 1 2 3 4 5 6
OK
1 2 3 4 5 6
MDON
654321
Press the MENU button until the "Local Control'
LED illuminates. The display will read .
This means that channel 1 output level is
currently set to 0.