Filter
Top Products
Need help? Call
1-800-950-7044
26
CHANNEL SCAN
Channel scan lets you scan through all available
channels on your TV, VCR, or cable converter,
stopping at each for about 3 seconds.
Note:
Channel scan does not operate if favorite
channel scan is programmed for any device. See
“Favorite Channel Scan.”
1. Press the device key (
TV
,
VCR
, or
CBL
).
2. Aim the Phone Up 4 at your device and
press
SCAN
. The Phone Up 4 scans through
the available channels.
Note:
The Phone Up 4 must be pointed at
the device the entire time you use channel
scan.
3. To stop scanning, simply press any key on
the Phone Up 4.
FAVORITE CHANNEL SCAN
Favorite channel scan lets you set up your Phone
Up 4 to scan through up to 10 preselected chan-
nels, stopping at each for about 3 seconds.
Setting Favorite Channel Scan
Note:
Favorite channel scan can only be set up
for one device. Once favorite channel scan is set
up for a device, you must clear it before you can
use channel scan for any device.
1. Press the desired device key (
TV
,
VCR
, or
CABLE
).
2. Press and hold down
SETUP
until the red
light blinks twice, then release it.
3. Press
9 9 6
. The red light blinks twice again.
15-1917.fm Page 26 Monday, July 19, 1999 12:25 PM