Filter
Top Products
- 15 - EN
1B17
SET UP FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen
menu, follow the procedure below.
1
Press the MENU button so that the
menu display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "LANGUAGE".
3
Select "ENGLISH", "ESPAÑOL" = Spanish or
"FRANÇAIS" = French by using the Arrow B or s
button.
4
Press the MENU button to exit the menu.
NOTE: An on-screen display language must be
selected each for the TV mode and DVD mode.
PICTURE
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL PRESETTING
To preset a channel or to change a preset channel,
follow the procedure below.
1
Press the MENU button so that the
menu display appears on the TV
screen.
2
Press the Arrow K or L button to
point to "CHANNEL SET". Then,
press the Arrow B button.
3
Press the Arrow K or L button to
point to "AUTO MEMO". Then,
press the Arrow B button.
The tuner scans and memorizes all
active channels in your area.
•
The TV distinguishes between standard TV chan-
nels and cable channels.
•
When AUTO MEMO action is completed, the low-
est memorized channel reappears on the screen.
•
When you press the Arrow K or L button after
selecting AUTO MEMO, the tuner will stop at the
memorized channels only.
•
The TV may recognize TV channels to be CATV
channels by the receiving conditions. In this case,
try AUTO MEMO action again in the fine receiv-
ing conditions.
[ADD/DELETE FUNCTION]
1)Press the MENU button so that the menu display
appears on the TV screen.
2)Press the Arrow K or L button
to point to "CHANNEL SET".
Then, press the Arrow B button.
3)Press the Arrow K or L button
to point to "ADD/DELETE".
Then press the Arrow B button.
4)Use the Arrow K or L button to
select the channel you wish to
put into memory or to erase from memory.
NOTE: The display will return to the screen in
about 10 seconds. Perform "ADD/DELETE" func-
tion while this display appears on the screen.
•
Press the Arrow B or s button to light up the
channel number in LIGHT BLUE if you wish to
add the channel into memory.
•
Press the Arrow B or s button to light up the
channel number in LIGHT RED if you wish to
erase the channel from memory.
5)Press the MENU button to exit the menu.
PICTURE
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
PICTURE
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
Getting started
1
Connect the power cord to a standard AC outlet.
NOTE: If some digits appear in the corner of the
screen, press the POWER button without unplugging
the power cord.
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until
channel number or "TV" appears on the screen.
Then press the TV button.
TV SECTION
PICTURE
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TD205.QX33 01.3.3 1:39 PM Page 15